Page 77
J-400
14.4 Locking and Unlocking the Topside
1. From the “Settings 3” Menu (Figure J), press button B to access the
Lock feature. The Lock Menu opens up to a padlock (Figure K). This
feature accepts a three digit code to lock and unlock the panel from
unauthorized use.
2. To set each “lock code” digit, use the Left or Right button on the
Quad Keypad. To change a number, press the Up or Down button
to scroll through selection 0-9 (Figure L). Once you have selected a
3-digit code, press the Splash button to save your changes. When
the spa is locked the LCD display will look like Figure M.
3. To Unlock the topside panel, press
the Splash button on the Quad
Keypad. The lock icon will appear on
the LCD display (Figure N). Press
the Up, Down, Left and Right Quad
Keypad buttons to enter “lock code”
from left to right. After all three lock
code digits are entered, press the
Splash button to access the Main Menu (if correct code
was entered).
Note: In case the lock/unlock code is lost or forgotten, a default code of
772 can be used to unlock the panel.
Figure J
Figure K
Language
ENG
SETTINGS 3
3
5
4
3
5
4
3
5 4 3
LOCK
0 0 0
Press to Save
5
4
3
2 4 8
LOCK
2 4 8
Press to Save
98
F
5:25 PM
Press to
enter lock code
Figure L
Figure M
Figure N
5
4
3
5 4 3
LOCK
Press to unlock
To Next Page
Loading...
Need help?
General
