Compass
By selecting Compass, the following settings can be
changed:
Calibration (If Equipped)
This compass is self-calibrating, which eliminates the need
to set the compass manually. When the vehicle is new, the
compass may appear erratic, and the cluster will display
dashes (- -) until the compass is calibrated. You may also
calibrate the compass by completing one or more 360
degree turns (in an area free from large metal or metallic
objects) until the dashes (- -) displayed in the instrument
cluster display turns off. The compass will now function
normally.
Variance (If Equipped)
Compass Variance is the difference between Magnetic
North and Geographic North. To compensate for the
differences, the variance should be set for the zone where
the vehicle is driven, per the zone map. Once properly set,
the compass will automatically compensate for the differ-
ences and provide the most accurate compass heading.
Battery Saver On/Battery Saver Mode Message —
Electrical Load Reduction Actions — If Equipped
This vehicle is equipped with an Intelligent Battery Sensor
(IBS) to perform additional monitoring of the electrical
system and status of the vehicle battery.
In cases when the IBS detects charging system failure, or
the vehicle battery conditions are deteriorating, electrical
load reduction actions will take place to extend the driving
time and distance of the vehicle. This is done by reducing
power to or turning off non-essential electrical loads.
Compass Variance Map
116 GETTING TO KNOW YOUR INSTRUMENT PANEL
To Next Page
Loading...
Need help?
General
