Chassis
Component Fluid, Lubricant, or Genuine Part
Manual Transmission – If Equipped We recommend you use Mopar C Series Manual & Dual
Dry Clutch Transmission Fluid.
Six-Speed Automatic Transmission (FWD Models) – If
Equipped
Use only Mopar AW-1 Automatic Transmission Fluid, or
equivalent. Failure to use the correct fluid may affect the
function or performance of your transmission.
Nine-Speed Automatic Transmission (4WD Models) – If
Equipped
Use only Mopar ZF 8&9 Speed ATF Automatic Transmis-
sion Fluid, or equivalent. Failure to use the correct fluid
may affect the function or performance of your transmis-
sion.
Power Transfer Unit (PTU) – If Equipped We recommended you use Mopar Front Axle/PTU Syn-
thetic Axle Lubricant SAE 75W-90 (API GL-5).
Rear Differential (RDM) – If Equipped We recommended you use Mopar Rear Axle/RDM Syn-
thetic Axle Lubricant SAE 75W-90 (API GL-5).
Brake Master Cylinder We recommend you use Mopar DOT 3. If DOT 3 brake
fluid is not available, then DOT 4 is acceptable.
Refrigerant Use Only Refrigerant R134a
Charge Amounts:
2.4L Engines — 567g (1.25lb)
Compressor Oil Use Only PAG Oil RL-897
2.4L Engines — 135ml (4.56oz)
420 TECHNICAL SPECIFICATIONS
To Next Page
Loading...
Need help?
General
