Jeep Compass2018 User Manual

— Speed Control SET Indicator Light
This light will turn on when the speed control is set. Refer
to “Speed Control — If Equipped” in “Starting And
Operating” for further information.
— Active Speed Limiter ON Indicator Light — If
Equipped
This light will turn on when the Active Speed Limiter is on,
but not set.
Green Indicator Lights
— Active Speed Limiter SET Indicator Light
This light will turn on when the Active Speed Limiter is on
and set to a specific speed.
— LaneSense Indicator Light — If Equipped
The LaneSense indicator is solid green when both lane
markings have been detected and the system is “armed”
and ready to provide visual and torque warnings if an
unintentional lane departure occurs. Refer to “LaneSense
— If Equipped⬙ in “Starting And Operating” for further
information.
— Park/Headlight On Indicator Light
This indicator will illuminate when the park lights or
headlights are turned on.
— Front Fog Indicator Light — If Equipped
This indicator will illuminate when the front fog lights are
on.
— Turn Signal Indicator Lights
When the left or right turn signal is activated, the turn
signal indicator will flash independently and the corre-
sponding exterior turn signal lamps will flash. Turn signals
can be activated when the multifunction lever is moved
down (left) or up (right).
NOTE:
• A continuous chime will sound if the vehicle is driven
more than 1 mile (1.6 km) with either turn signal on.
• Check for an inoperative outside light bulb if either
indicator flashes at a rapid rate.
— Cruise Control SET Indicator Light
This light will turn on when the speed control is set to the
desired speed. Refer to “Speed Control” in “Starting And
Operating” for further information.
130 GETTING TO KNOW YOUR INSTRUMENT PANEL

Jeep Compass2018 Specifications

General

Brand	Jeep
Model	Compass2018
Category	Automobile
Language	English