Bottom Board Grate Removal
The bottom board can be removed by lifting up at the rear edge. There is a small recess at the centre, along the
rear edge that will assist in lifting the board at the back edge. Then gently slide the board rearwards releasing
thefrontoftheboardfromunderthefrontmetalange.Thebottomboardwillneedtiltingsidewaystoclear
the stove opening when removing. Care should be taken to ensure that the board does not become damaged.
Lifting the board can be helped by pushing up the board from the ash pan recess with one hand and lifting the
rear of the board at the recess.
Recess in rear of board
Bottom board can be lifted by pushing Tilt board to remove
up from under the ashpan recess
Rear Board Removal
Removetherearverticalboardbygentlypullingthetopedgeoutrst,thenslideforward.
The rear board will need to be tilted/twisted sideways to clear the stove opening in a similar manner to the bottom
board.
Side Board Removal
Theleftandrightsideboardscanberemovedbygentlypullingoneedgeoutrstthen,slidetheboardstowards
the centre of the stove.
16
To Next Page
Loading...
Need help?
General
