①
Turning ON the teaching function
Press
❷
to turn ON the teaching
function.
②
Start teaching, and conrm data on a step-by-step basis
The input value is set to 0 (zero). Depress the pedal to start sewing. Count the number of stitches
until the sewing machine stops.
<Number of stitches input screen>
(2) How to set (polygonal-shape stitching)
Carry out the step until its end is reached (the
last stitch is sewn). Then, press
❸
to
conrm the teaching data.
Return the current screen to the sewing
screen (maintenance personnel mode).
Press
❹
to conrm the teaching data
on the current step. Press
❺
to
change the current screen to the number of
stitches input screen for the next step.
If no further step to be registered is present,
this operation will be disabled.
After the completion of sewing steps (the last stitch), depress the back part
of pedal. Then, the data entered for the current step under the teaching
mode is conrmed and the screen is changed to the teaching screen for the
next step.
If no further step to be registered is present, this operation will be disabled.
1. In the case of starting the teaching by operation on the operation panel
2. In the case of starting the teaching using the pedal
❺
❹
❷ ❸
– 49 –
To Next Page
Loading...
Need help?
General
