JUKI DDL-9000C-F User Manual

4-6. List of errors
Error
code
Description of error Cause Item to be checked
E000 Execution of data
initialization (This is
not an error.)
• The existing control box has been
removed and a new one is mounted.
• In the case the initialization operation is
executed.
This is not a failure.
E007 Motor overload
• In the case the machine head is locked.
• In the case of sewing extra-heavy
weight material that exceeds the
guaranteed material thickness.
• In the case the motor fails to rotate.
• In the case of the motor or driver failure.
• Check whether the pulley is entangled
with thread.
• Check whether the motor output
connector (4P) has loosened.
• Check whether the motor can be
turned smoothly by hand.
E009 Overtime of solenoid
energization
• In the case the length of solenoid
energizing time has exceeded the
assumed one.
E011 Media is not inserted
• In the case no media is inserted. • Turn the power OFF and check for a
media.
E012 Read error
• In the case data stored on the media
cannot be read.
• Turn the power OFF and check for a
media.
E013 Write error
• In the case data cannot be written on
the media.
• Turn the power OFF and check for a
media.
E014 Write protect
• In the case the media is placed in the
write-prohibition state.
• Turn the power OFF and check for a
media.
E015 Format error
• In the case formatting of the media
cannot be carried out.
• Turn the power OFF and check for a
media.
E016 External media over-
capacity
• In the case the capacity of media is not
enough.
• Turn the power OFF and check for a
media.
E019 File size over
• In the case of attempting to read the
custom pitch data or condensation
custom data which exceeds the
maximum permissible data size into the
memory of sewing machine from the
USB thumb drive.
• Turn the power OFF and check the
USB thumb drive.
E022 File undetected
• In the case of attempting to read a le
which is not stored in the USB thumb
drive into the operation panel.
E032 File compatibility
error
• In the case the le is not compatible. • Turn the power OFF and check for a
media.
E071 Slip-off of the motor
connector
• In the case the motor connector has
slipped off.
• Check for looseness and slip-off of
the motor output connector.
E072 Motor overload when
the thread trimmer
operates
• Same as E007. • Same as E007.
E079 Overload operation
error
• Load applied to the main shaft motor is
excessively large.
E081 Feed driving motor
lock
• In the case the feed driving motor is
locked.
• Check whether the feed driving motor
operates smoothly.
E204 USB insertion
• In the case the sewing machine is
started up without removing the USB
thumb drive.
• Remove the USB thumb drive.
– 67 –

JUKI DDL-9000C-F Specifications

General

Brand	JUKI
Model	DDL-9000C-F
Category	Sewing Machine
Language	English