JUKI DNU-1541S User Manual

➊
➋
➌
8. ATTACHING AND REMOVING THE BOBBIN CASE
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
1) Remove the bobbin case while lifting upper knob
➊
.
2) When attaching the bobbin case, insert it into the hook
shaft properly, adjust indented part
➋
of inner hook
➋
to lower knob
➌
of the bobbin case, and push the
bobbin case until it goes click.
– 20 –
➊
➋
➌
9. INSTALLING THE BOBBIN WINDER THREAD GUIDE
1) Attach bobbin winder thread guide
➊
to the top cover
using screws
➋
.
2) Adjust the position of the thread guide referring to “10.
WINDING A BOBBIN”.
3) Strike bobbin thread guide rod
➌
into the machine arm.
– 21 –

JUKI DNU-1541S Specifications

General

Machine Type	Single Needle Lockstitch
Max Stitch Length	9 mm
Presser Foot Lift by Hand	9 mm
Presser Foot Lift by Knee	16 mm
Lubrication	Automatic
Max Sewing Speed	2500 stitches per minute
Hook	Full Rotary Hook
Bed Size	477mm(L)×177mm(W)