JUKI DNU-1541S User Manual

22. RESETTING THE SAFETY CLUTCH (DNU-1541S)
The safety clutch functions when an excessive load is applied to the hook or the other components during sewing. At this
time, the hook will never rotate even if turning the handwheel. When the safety clutch has functioned, remove the cause
and reset the safety clutch as given in the following procedure.
1) Pressing push button
➊
located on the top surface of the machine bed, strongly turn the handwheel in the reverse
direction of rotation.
2) The resetting procedure completes when the handwheel clicks.
➊
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
– 43 –

JUKI DNU-1541S Specifications

General

Machine Type	Single Needle Lockstitch
Max Stitch Length	9 mm
Presser Foot Lift by Hand	9 mm
Presser Foot Lift by Knee	16 mm
Lubrication	Automatic
Max Sewing Speed	2500 stitches per minute
Hook	Full Rotary Hook
Bed Size	477mm(L)×177mm(W)