JUKI DNU-1541S User Manual

DNU-1541H
1
2
5
6
8
＊ 10
11
12
3
4
9
7
A
B
1. Attach arm thread guide
A
to the top cover with
setscrew
B
.
2. Thread the machine head following the order of
1
through
12
as shown in the illustration given above.
＊
Pass thread through the right side of thread guide
10
.
When needle thread is apt to be off from thread tension
disk
5
during sewing, pass needle thread through arm
thread guide
A
in the order of
➊
through
➍
.
➊
➋
➌
A
➍
– 24 –
Turn stitch dial
➊
counterclockwise (clockwise) so that
the number corresponding to the desired stitch length is
brought to the top until the marking spot is reached.
(1) Reverse feed stitching
1) Press down reverse feed control lever
➋
.
2) Reverse feed stitches are made as long as you keep
pressing the lever down.
3) Release the lever, and the machine will run in the
normal feed direction.
➊
➋
12. ADJUSTING THE STITCH LENGTH
– 25 –

JUKI DNU-1541S Specifications

General

Machine Type	Single Needle Lockstitch
Max Stitch Length	9 mm
Presser Foot Lift by Hand	9 mm
Presser Foot Lift by Knee	16 mm
Lubrication	Automatic
Max Sewing Speed	2500 stitches per minute
Hook	Full Rotary Hook
Bed Size	477mm(L)×177mm(W)