JUKI DX-2000QVP User Manual

23
1
Lift the presser foot lifting lever.
1
2
3
4
5
Make sure to push the
needle to the top.
It is impossible to perform
stitching if the needle is not
correctly installed or a bent
needle is used. Pay close at-
tention as this will cause ma-
chine malfunction.
Note:
2
Small spool
Large spool
Place a thread spool to the spool pin and
a spool cap onto the spool pin.
There are three types of the spool caps, large, medi-
um and small. Choose the size of spool cap according
to thread spool to be used.
Threading the needle thread
* Use the needle: No.11-16
and the thread: No.30-90.
* When twin needle is used,
the automatic needle
threader can not be used.
* Align the marking at the
hand wheel with the one
on the machine body.
Spool cap
Spool cap
Needle thread preparation
Turn OFF the power switch be-
fore threading the machine head.
Attention

JUKI DX-2000QVP Specifications

General

Brand	JUKI
Model	DX-2000QVP
Category	Sewing Machine
Language	English