JUKI DX-2000QVP User Manual

72
Attaching pearl
Attention
Turn OFF the power switch
before replacing the press
-
er foot.
Pattern No. Direct 4
Presser foot
Pearl attaching
presser foot
1
Pearl should go through the groove of the
presser foot.
2
Check that needle will not hit the pearl
and then start to sew slowly.
Adjust the stitch length and stitch width according to the
diameter of pearls to be sewn or other conditions.
Use transparent thread for more beautiful nish.
Piping cord can be made with this presser foot.
< In case of pearl with 4.0 mm diameter >
Stitch length Zigzag width
～
4.0 mm 4.0 mm
* The maximum diameter of pearls that can be sewn with this presser foot is 4.0 mm.
～

JUKI DX-2000QVP Specifications

General

Brand	JUKI
Model	DX-2000QVP
Category	Sewing Machine
Language	English