28
② Designate the command position desired to be
deleted.
Specify the command position you desire to delete
with ONE STITCH BACKWARD button
(C) or
ONE STITCH FORWARD button
(D) in the
state that the presser is lowered.
In addition, the machine moves to the needle entry
point where the front or rear thread tension command
exists with
(E) or (F). When you desire
to stop the move, press STOP button
(G).
When ORIGIN MOVE button
(H) is pressed,
the machine moves to the origin.
When the present needle entry point exists on the
thread tension command, COMMAND DELETE
button
(L) is displayed.
③ Delete the thread tension command.
When COMMAND DELETE button
(L) is
pressed, the command delete screen is displayed.
When ENTER button
(M) is pressed, the
command is deleted.
C
E
D
L
H
G
F
M
To Next Page
Loading...
Need help?
General
