104
27. INFORMATION FUNCTION
There are three functions below in the information function.
1) Oil replacement time, needle replacement time, cleaning time, etc. are designated and the
warning notice is performed when the designated time has passed.
→ Refer to
27-1 Observing the maintenance inspection information, p.105
and
27-2 Inputting the inspection time. p.108.
2) Speed can be checked at a glance and the target achieving consciousness as a line or group is
increased as well by the function to display the target output and the actual output.
→ Refer to
27-4 Observing the production control information, p.111
and
27-5 Performing setting of the production control information, p.114.
3) Information on machine working ratio, pitch time, machine time and machine speed can be
displayed from the working state of the sewing machine.
→ Refer
27-6 Observing the working measurement information, p.118.
In addition, information on plural sewing machines can be controlled by the server when this function
is used by connecting SU-1 (sewing machine data server utility) with the sewing machines.
SU-1
LK-1900A LBH-1790
LZ-2290A
To Next Page
Loading...
Need help?
General
