55
19. COPYING PATTERN BUTTON
The sewing data of the pattern button No. which
has already been registered can be copied to the
pattern button No. which is not registered.
Overwriting copy of the pattern button is prohibited.
When you desire to overwrite, perform the
overwriting after erasing the pattern button once.
→ Refer to
16. PERFORMING PATTERN
BUTTON No. SELECTION, p.48.
① Display the data input screen.
Only in case of the data input screen (blue) at
the time of pattern button selection, it is
possible to copy. In case of the sewing screen
(green), press READY key
to display the
data input screen (blue).
② Call the pattern copy screen.
When PATTERN BUTTON COPY button
(A) is pressed, the pattern button copy (copy
source selection) screen is displayed.
③ Select the pattern No. of copy source.
Select the pattern button No. of copy source
from the pattern button list button (B).
Next, press COPY DESTINATION INPUT
button
(C) and the copy destination input
screen is displayed.
A
B
C
To Next Page
Loading...
Need help?
General
