－
36
－
(3) Count-up releasing procedure
E
①
Sewing UP counter
Every time the sewing of one shape is performed, the existing value is counted up.
When the existing value is equal to the set value, count-up screen is displayed.
②
Sewing DOWN counter
Every time the sewing of one shape is performed, the existing value is counted down.
When the existing value is reached to "0", count-up screen is displayed.
③
No. of pcs. UP counter
The current value shown on the counter is added by one every time the cycle sewing
is carried out. When the existing value is equal to the set value, count-up screen is dis-
played.
④
No. of pcs. DOWN counter
The current value shown on the counter is subtracted by one every time the cycle sewing
is carried out. When the existing value is reached to "0", count-up screen is displayed.
⑤
Bobbin thread count-up counter
The current value on the counter is increased by one every time 10 stitches are sewn.
When the current value equals to the set value, the count-complete screen is displayed.
⑥
Bobbin thread count-down counter
The current value on the counter is decreased by one every time 10 stitches are sewn.
When the current value is decreased to zero (0), the count-complete screen is displayed.
⑦
Counter not used
When count-up condition is reached during sew-
ing work, the whole count-up screen
E
ashes
on and off. Press RESET key
❸
to reset
the counter, and the mode returns to the sewing
mode. Then the counter starts counting again.
❸
(2) Kind of counter
To Next Page
Loading...
Need help?
General
