– 126 –
8-2-2. Creating a new polygonal-shape stitching pattern
Selecting the new-pattern creating function
Display the "new sewing pattern creation screen" referring to
in
"8-1-1. Creation of a new pattern" p. 116
.
Creating a polygonal shape stitching pattern
Setting the pattern function on a step-by-step basis
<New pattern creation screen>
<New sewing pattern edit screen>
<Sewing screen (Polygonal-shape stitching pattern)>
Referring to
in
"8-1-1. Creation of a new pat-
tern" p. 116
, select polygonal-shape stitching
pattern
on the sewing pattern selection
screen. Then, press
.
The "new sewing pattern edit screen" is dis-
played.
8-2-3. Setting the step from which polygonal-shape stitching is started
In the case it is necessary to re-sew a pattern from the middle of the pattern after the occurrence of troubles
such as thread breakage, it is possible to re-start sewing from an arbitrary step of the pattern.
The current step can be changed by press-
ing
on the sewing screen for polygo-
nal-shape stitching pattern.
1) Set the pattern function with buttons
on a
step-by-step basis.
Refer to
"5-2. Sewing patterns" p. 38
.
2) The total number of steps you have set is dis-
played on the right of section
A
. The current
step is displayed on the left of section
A
. The
current step can be changed with
.
3) Press
.
The "sewing pattern number registration
screen" is displayed.
Press
to display the data discard
conrmation screen.
Steps of procedure to be taken after the afore-
mentioned step are same as steps
to
in
"8-
1-1. Creation of a new pattern" p. 116
.
A
To Next Page
Loading...
Need help?
General
