– 79 –
5-3-7. Pattern 1
<Sewing shape selection screen>
1) Select pattern 1 stitch
on the sewing shape
selection screen.
2) When
is pressed, the entered value
is conrmed and the screen is returned to the
"Sewing screen".
3) Setting of the position of sewing start.
・
Press
on the sewing screen.
The "Sewing data edit screen" is displayed.
* Refer to
"5-3-1. 4) Setting the zigzag width,
stitch baseline and stitch length." p. 67
for the zigzag width, stitch baseline position
and stitch length.
<Sewing screen>
<Sewing starting position selection screen>
・
Select the sewing starting position
.
: Sewing starting position, Center 1
: Sewing starting position, Center 2
: Sewing starting position, left
: Sewing starting position, Center 3
: Sewing starting position, right
: Sewing starting position, optional
・
When
is pressed, the entered value
is conrmed and the screen is returned to the
"Sewing data edit screen".
In the case of "Sewing starting posi-
tion, optional", the sewing machine
starts sewing from the next needle
entry after the completion of thread
trimming.
<Sewing data edit screen>
・
When
is pressed, the "Sewing start-
ing position selection screen" is displayed.
To Next Page
Need help?
General
