– 60 –
5-2-7. Teaching function
This is the function that enables entry of the number of stitches of a sewing pattern using the actual number
of stitches sewn.
This function screen can be displayed from the sewing data edit screen.
* The teaching function can be used in the case the "constant-dimension sewing" or "polygonal-shape
stitching" is selected.
Displaying the number of stitches input
screen
Press
on the sewing data list screen.
Then, the "number of stitches input screen" is
displayed.
Turning ON the teaching function
Press
to turn ON the teaching func-
tion.
Starting teaching
The input value is set to 0 (zero). Carry out
sewing until the needle entry position at which
you want to nish sewing by depressing the
pedal. Then, count the number of stitches
sewn using the teaching function.
Conrming the data entered under the
teaching mode
Conrm the content of teaching by carrying
out thread trimming.
Return the current screen to the "sewing
screen (constant-dimension sewing) (mainte-
nance personnel mode)".
<Number of stitches input screen>
(1) How to set (constant-dimension sewing)
<Sewing screen (constant-dimension sewing)
(Maintenance personnel mode)>
To Next Page
Loading...
Need help?
General
