– 70 –
5-3-2. Scallop stitching
<Sewing shape selection screen>
1) Select scallop stitch
on the sewing shape
selection screen.
2) When
is pressed, the entered value
is conrmed and the screen is returned to the
"Sewing screen".
3) Setting of the position of sewing start.
・
Press
on the sewing screen.
The "Sewing data edit screen" is displayed.
* Refer to
"5-3-1. 4) Setting the zigzag width,
stitch baseline and stitch length." p. 67
for the zigzag width, stitch baseline position
and stitch length.
<Sewing screen>
<Sewing data edit screen>
<Scallop stitch starting position selection screen>
・
Select scallop stitch starting position
.
: Scallop stitch starting position, bottom
: Scallop stitch starting position, apex
・
When
is pressed, the entered value
is conrmed and the screen is returned to the
"Sewing data edit screen".
・
When
is pressed, the "Scallop stitch
starting position selection screen" is dis-
played.
To Next Page
Loading...
Need help?
General
