– 22 –
*1 Cloth pulling amount, the cloth puller pressure, sewing speed and the presser foot presser can be set using
the sewing data items given below according to the state of the material placed under the presser foot.
State of the material
under the presser foot
Cloth pulling amount Cloth puller pressure Sewing speed Presser foot pressure
Flat section
/
S006
Cloth pulling amount
S007
Cloth puller pressure
S004
Limit of sewing
speed
S005
Presser foot pressure
End of the
multi-layered
section of
material
Multi-layered
section begins
S015
Cloth pulling amount
when the presser
foot runs on the
multi-layered section
S016
Cloth puller pressure
when the presser foot
runs on the multi-lay-
ered section
S012
Multi-layered section
sewing speed
During the
multi-layered
section of
material
S019
Cloth pulling amount
for sewing the
multi-layered section
S020
Cloth puller pres-
sure for sewing the
multi-layered section
S018
Presser foot pres-
sure for sewing the
multi-layered section
No material
S072
Cloth pulling amount
when detecting no
material
(In the case the
material under the
cloth puller is at
section, the cloth
pulling amount set
with S006 will be
employed.)
S073
Cloth puller pressure
when detecting no
material
(In the case the ma-
terial under the cloth
puller is at section,
the cloth pulling puller
pressure set with S007
will be employed.)
S052
Limit to the sewing
speed to be applied
after the detection of
absence of material
(While the sewing
machine is at rest,
the highest one of
four sewing speeds
shown in the table is
displayed.)
S005
Presser foot pressure
Top end of
material
S072
Cloth pulling amount
when detecting no
material
S073
Cloth puller pressure
when detecting no
material
S031
Sewing speed for
starting sewing of the
top end of material
S032
Presser foot pressure
for starting sewing of
the top end of material
It should be noted, however, that the presser foot pressure, cloth pulling amount and the cloth puller pressure can
be set as sewing data as described below according to the condition of material placed under the cloth puller.
State of the material
placed under the
cloth puller
Presser foot pressure Cloth pulling amount Cloth puller pressure
Multi-lay-
ered section
begins
S078
Presser foot pressure when
the cloth puller runs on the
multi-layered section
S070
Cloth pulling amount when
the cloth puller runs on the
multi-layered section
S071
Cloth puller pressure when
the cloth puller runs on the
multi-layered section
Top end of
material
(The presser foot pressure will
be as given in the table shown
above.)
S076
Cloth pulling amount when
the cloth puller runs on the
multi-layered section
S077
Cloth puller pressure when
the cloth puller runs on the top
end of material
No material
(The presser foot pressure will
be as given in the table shown
above.)
S072
Cloth pulling amount when
detecting no material
S073
Cloth puller pressure when
detecting no material
Refer to "4-4-8. List of sewing data" p. 39 for details of sewing data items to be used in the respective
states of the material.
To Next Page
Loading...
Need help?
General
