Juniper E Series Configuration Guide

JUNOSe 7.2.x Policy Management Configuration Guide
54 ! Merging Policies
classifier-group C1 precedence 90
forward next-hop 10.1.1.1
!
ip policy-list p2
classifier-group C3 precedence 10
filter
classifier-group C1 precedence 90
forward next-hop 20.1.1.1
classifier-group * precedence 1000
forward
!
…
…
! End of generated configuration script.
7. Display interface statistics.
host1#show ip interface atm 5/0.1
ATM5/0.1 line protocol Atm1483 is up, ip is up
Network Protocols: IP
Internet address is 99.99.99.2/255.255.255.0
Broadcast address is 255.255.255.255
Operational MTU = 9180 Administrative MTU = 0
Operational speed = 155520000 Administrative speed = 0
Discontinuity Time = 721112
Router advertisement = disabled
Proxy Arp = disabled
Network Address Translation is disabled
TCP MSS Adjustment = disabled
Administrative debounce-time = disabled
Operational debounce-time = disabled
Access routing = disabled
Multipath mode = hashed
Auto Configure = disabled
Auto Detect = disabled
Inactivity Timer = disabled
In Received Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Packets 0, Bytes 0
In Policed Packets 0, Bytes 0
In Error Packets 0
In Invalid Source Address Packets 0
In Discarded Packets 0
Out Forwarded Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Routed Packets 0, Bytes 0
Out Scheduler Dropped Packets 0, Bytes 0
Out Policed Packets 0, Bytes 0
Out Discarded Packets 0
IP policy input mpl_5
classifier-group C2 entry 1
0 packets, 0 bytes
filter
classifier-group C3 entry 1
0 packets, 0 bytes
filter
classifier-group C1 entry 1
0 packets, 0 bytes
forward
classifier-group *

Juniper E Series Specifications

General

Brand	Juniper
Model	E Series
Category	Network Router
Language	English