Juniper J-series Services Router J4350 User Manual

Chapter 4
Services Router User Interface Overview
You can use two user interfaces to monitor, configure, troubleshoot, and manage a
Services Router—the J-Web interface and the JUNOS command-line interface (CLI).
This chapter contains the following topics:
■ User Interface Overview on page 81
■ Before You Begin on page 82
■ Using the J-Web Interface on page 83
■ Using the Command-Line Interface on page 91
User Interface Overview
This section contains the following topics:
■ J-Web Overview on page 81
■ CLI Overview on page 82
J-Web Overview
The J-Web interface allows you to monitor, configure, troubleshoot, and manage the
Services Router by means of a Web browser enabled with Hypertext Transfer Protocol
(HTTP) or HTTP over Secure Sockets Layer (HTTPS). J-Web provides access to all the
configuration statements supported by the Services Router, so you can fully configure
it without using the JUNOS CLI.
You can perform the following tasks with the J-Web interface:
■ Monitoring—Display the current configuration and information about the system,
interfaces, chassis, routing protocols, routing tables, routing policy filters, and
other features.
■ Configuring—View the current configurations at a glance, configure the Services
Router, and manage configuration files. The J-Web interface provides the following
different configuration methods:
■ Configure the Services Router quickly and easily without configuring each
statement individually.
■ Edit a graphical version of the JUNOS CLI configuration statements and
hierarchy.
User Interface Overview ■ 81

Juniper J-series Services Router J4350 Specifications

General

Brand	Juniper
Model	J-series Services Router J4350
Category	Network Router
Language	English