Objectives
This guide provides an overview of the Layer 2 features of the Junos OS and describes
how to configure the features to provide solutions to several network scenarios.
NOTE: For additional information about the Junos OS—either corrections to
or information that might have been omitted from this guide—see the software
release notes at http://www.juniper.net/ .
Audience
This guide is designed for network administrators who are configuring and monitoring
Layer 2 features of the Junos OS.
To use this guide, you need a broad understanding of networks in general, the Internet
in particular, networking principles, and network configuration. You must also be familiar
with one or more of the following Internet routing protocols:
•
Border Gateway Protocol (BGP)
•
Distance Vector Multicast Routing Protocol (DVMRP)
•
Intermediate System-to-Intermediate System (IS-IS)
•
Internet Control Message Protocol (ICMP) router discovery
•
Internet Group Management Protocol (IGMP)
•
Multiprotocol Label Switching (MPLS)
•
Open Shortest Path First (OSPF)
•
Protocol-Independent Multicast (PIM)
•
Resource Reservation Protocol (RSVP)
•
Routing Information Protocol (RIP)
•
Simple Network Management Protocol (SNMP)
Personnel operating the equipment must be trained and competent; must not conduct
themselves in a careless, willfully negligent, or hostile manner; and must abide by the
instructions provided by the documentation.
Copyright © 2012, Juniper Networks, Inc.xiv
Junos OS 12.1 MX Series 3D Universal Edge Routers Solutions Guide
To Next Page
Loading...
Need help?
General
