Juniper Junos OS User Manual

protocol—IP protocol number
resource-manager—Resource manager
root-logical-system—Display root logical system as default
security-intelligence—Display security intelligence sessions
services-offload—Display services offload sessions
session-identifier—Display session with specified session identifier
source-port—Source port
source-prefix—Source IP prefix
summary—Display output summary
tunnel—Tunnel sessions
• brief | extensive | summary—Display the specified level of output.
• none—Display information about all active sessions.
Required Privilege
Level
view
Related
Documentation
Juniper Networks Devices Processing Overview•
• clear security flow session all
List of Sample Output show security flow session on page 112
show security flow session brief on page 112
show security flow session extensive on page 113
show security flow session summary on page 113
Output Fields Table 12 on page 110 lists the output fields for the show security flow session command.
Output fields are listed in the approximate order in which they appear.
Table 12: show security flow session Output Fields
Field DescriptionField Name
Number that identifies the session. Use this ID to get more information about the session.Session ID
Policy that permitted the traffic.Policy name
Idle timeout after which the session expires.Timeout
Incoming flow (source and destination IP addresses, application protocol, interface,
session token, route, gateway, tunnel, port sequence, FIN sequence, FIN state, packets
and bytes).
In
Copyright © 2016, Juniper Networks, Inc.110
Getting Started Guide for Branch SRX Series

Juniper Junos OS Specifications

General

Brand	Juniper
Model	Junos OS
Category	Network Hardware
Language	English