show system license (View)
Syntax show system license
<installed | keys | status | usage>
Release Information Command introduced in Junos OS Release 9.5. Logical system status option added in
Junos OS Release 11.2.
Description Display licenses and information about how licenses are used.
Options none—Display all license information.
installed—(Optional) Display installed licenses only.
keys—(Optional) Display a list of license keys. Use this information to verify that each
expected license key is present.
status—(Optional) Display license status for a specified logical system or for all logical
systems.
usage—(Optional) Display the state of licensed features.
Required Privilege
Level
view
Related
Documentation
Working with License Keys for SRX Series Devices•
List of Sample Output show system license on page 134
show system license installed on page 134
show system license keys on page 135
show system license usage on page 135
show system license status logical-system all on page 135
Output Fields Table 18 on page 133 lists the output fields for the show system license command. Output
fields are listed in the approximate order in which they appear.
Table 18: show system license Output Fields
Field DescriptionField Name
Name assigned to the configured feature. You use this information to verify that all the features for
which you installed licenses are present.
Feature name
Number of licenses used by the device. You use this information to verify that the number of licenses
used matches the number configured. If a licensed feature is configured, the feature is considered
used.
Licenses used
133Copyright © 2016, Juniper Networks, Inc.
Chapter 12: Operational Commands
To Next Page
Loading...
Need help?
General
