Jura IMPRESSA Z7 User Manual

22
3 Daily operation
3 Daily operation
When the IMPRESSA is switched on, it automatically prompts you
to perform the rinse operation. Start the rinse operation by pressing
the Maintenance button c. In programming mode you can change
this setting so that the machine starts the switch-on rinse automat-
ically (see Chapter 4 ‘Permanent settings in programming mode –
Rinses’).
Precondition: Your IMPRESSA is switched on at the power switch.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button to switch the IMPRESSA on.
WELCOME TO JURA appears on the display.
UNIT IS HEATING
PRESS RINSE, the Maintenance button c lights up.
c T Press the Maintenance button.
RINSING, the machine rinses.
The operation stops automatically.
SELECT PRODUCT
appears on the display.
To ensure that you get many years of reliable service out of your
IMPRESSA and to guarantee the optimum coffee quality, the
machine requires daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
T Dry the metal contacts on the back of the drip tray.
T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Dismantle and rinse the cappuccino frother (see Chapter 5
‘Maintenance – Dismantling and rinsing the cappuccino
frother’).
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
Switching on
Daily maintenance

Jura IMPRESSA Z7 Specifications

General

Type	Coffee
Dimensions (WxDxH)	31 x 370 x 435 mm
Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	20 cups
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	2.8 L
Maximum operating pressure	15 bar
Lid type	Hinged lid
Color name	Alu
Cord length	1.1 m
Product color	Aluminum
Multi beverage	No

Weight and Dimensions

Weight	13500 g