39
5 Maintenance
T Empty the other receptacle and place it under the cappuc-
cino frother again.
c T Press the Maintenance button.
CAPPUCCINO CLEANING, the cappuccino frother and
the pipe are rinsed with fresh water.
COFFEE READY appears on the display.
T Carefully pull the cappuccino frother down and off.
T Dismantle the frother into its individual parts.
T Rinse all frother parts thoroughly under running water.
T Reassemble the cappuccino frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure correct operation of the cappuccino frother.
T Firmly attach it to the connector.
Your IMPRESSA no longer has to be descaled if you are using the
CLARIS Blue filter cartridge. If the water hardness is 10° dH or more,
we recommend using the filter cartridge. If you do not know the
hardness of your water, you can find this out first (see Chapter 1 ‘Pre-
paring and using for the first time – Determining the water hard-
ness’).
If you did not activate the filter cartridge the first time you used the
machine, you can do this now as follows.
E Perform the ‘inserting the filter’ operation without any inter-
ruptions. This will ensure that your IMPRESSA always produces
its best.
Precondition:
SELECT PRODUCT is displayed.
k T Press and hold the Rotary Switch until
MAINTENANCE
appears on the display.
g T Turn the Rotary Switch until
FILTER is displayed.
k T Press the Rotary Switch to enter the programme item.
FILTER NO
g T Turn the Rotary Switch until FILTERYES is displayed.
Dismantling and rinsing
the cappuccino frother
Inserting and activating
the filter
To Next Page
Loading...
Need help?
General
Weight and Dimensions
