Jura IMPRESSA Z7 User Manual

30
4 Permanent settings in programming mode
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
In the programme item RINSES you can make the following set-
tings:
U
START RINSE MANUAL
U
The switch-on rinse must be started manually.
U
START RINSE AUTO
U
The switch-on rinse is started automatically.
U
CAPPU. RINSE AFTER 10MIN
U
You are prompted to perform a cappuccino rinse 10 minutes
after preparation of a speciality coffee with milk.
U
CAPPU. RINSE NOW
U
You are prompted to perform a cappuccino rinse immedi-
ately after preparation of a speciality coffee with milk.
U
CAPPU. RINSE AUTO
U
Cappuccino frother rinsing is automatically initiated 10 min-
utes after preparation of a speciality coffee with milk.
Example: Proceed as follows to make the machine prompt you to
perform cappuccino frother rinsing immediately after preparing a
speciality coffee with milk.
Precondition:
SELECT PRODUCT is displayed.
k T Press and hold the Rotary Switch until
MAINTENANCE
appears.
g T Turn the Rotary Switch until
RINSES is displayed.
k T Press the Rotary Switch to enter the programme item.
START RINSE MANUAL
g T Turn the Rotary Switch until CAPPU. RINSE AFTER
10MIN is displayed.
k T Press the Rotary Switch to enter the programme item.
CAPPU. RINSE AFTER 10MIN
g T Turn the Rotary Switch until CAPPU. RINSE NOW is dis-
played.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
CAPPU. RINSE NOW
Rinses

Jura IMPRESSA Z7 Specifications

General

Type	Coffee
Dimensions (WxDxH)	31 x 370 x 435 mm
Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	20 cups
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	2.8 L
Maximum operating pressure	15 bar
Lid type	Hinged lid
Color name	Alu
Cord length	1.1 m
Product color	Aluminum
Multi beverage	No

Weight and Dimensions

Weight	13500 g