Jura IMPRESSA Z7 User Manual

34
4 Permanent settings in programming mode
In the programme item RESET you can reset various settings to
their factory settings:
U
PRODUCT
U
The settings (amount of water, aroma, temperature etc.) for
any product can be reset individually to the factory settings.
The corresponding double product is also reset to the fac-
tory settings at the same time.
U
ALL PROD.
U
The settings (amount of water, aroma, temperature etc.) for
all products are reset to the factory settings.
U
RESET ALL
U
All user settings (apart from the ‘filter’) are reset to factory
settings. Your IMPRESSA then switches off.
Example: Proceed as follows to reset the values for ‘Espresso’ to the
factory settings.
Precondition:
COFFEE READY is displayed.
k T Press and hold the Rotary Switch until
MAINTENANCE
appears.
g T Turn the Rotary Switch until
RESET is displayed.
k T Press the Rotary Switch to enter the programme item.
RESET / PRODUCT
k T Press the Rotary Switch to enter the programme item.
RESET / SELECT PRODUCT
i T Press the Espresso button.
CONFIRMED appears briefly on the display and the set-
tings for ‘Espresso’ are reset to the factory setting.
RESET / PRODUCT
g T Turn the Rotary Switch until RESET / EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
RESET
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
Restore factory settings

Jura IMPRESSA Z7 Specifications

General

Type	Coffee
Dimensions (WxDxH)	31 x 370 x 435 mm
Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	20 cups
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	2.8 L
Maximum operating pressure	15 bar
Lid type	Hinged lid
Color name	Alu
Cord length	1.1 m
Product color	Aluminum
Multi beverage	No

Weight and Dimensions

Weight	13500 g