Jura IMPRESSA Z7 User Manual

47
6 Display messages
6 Display messages
Message Cause/Result Action
WATER TANK FILL The water tank is empty.
You cannot prepare any
products.
T Fill the water tank (see
Chapter 1 ‘Preparing and using
for the first time – Filling the
water tank’).
GROUNDS EMPTY The coffee grounds container is
full.
You cannot prepare any
speciality coffees, but you can
prepare hot water and milk.
T Empty the coffee grounds
container and the drip tray.
TRAY EMPTY The drip tray is full.
You cannot prepare any
products.
T Empty the drip tray.
T Clean and dry the metal
contacts on the back of the drip
tray.
TRAY MISSING The drip tray is not inserted
correctly or is not inserted at all.
You cannot prepare any
products.
T Fit the drip tray.
COFFEE TRAY
MISSING
The coffee grounds container is
not inserted correctly or is not
inserted at all.
You cannot prepare any
products.
T Fit the coffee grounds
container.
PRESS RINSE
The IMPRESSA is prompting
you to perform a rinse or
continue a maintenance
programme that was already
started.
T Press the Maintenance button
to start the rinse or to continue
the maintenance programme.
COFFEE READY /
FILL BEANS
The bean container is empty.
You cannot prepare any
speciality coffees, but you can
prepare hot water and milk.
T Fill the bean container (see
Chapter 1 ‘Preparing and using
for the first time – Filling the
bean container’).
COFFEE READY /
CAPPU RINSE
The IMPRESSA requests a
cappuccino rinse.
T Press the Maintenance button
to start the cappuccino rinse.

Jura IMPRESSA Z7 Specifications

General

Type	Coffee
Dimensions (WxDxH)	31 x 370 x 435 mm
Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	20 cups
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	2.8 L
Maximum operating pressure	15 bar
Lid type	Hinged lid
Color name	Alu
Cord length	1.1 m
Product color	Aluminum
Multi beverage	No

Weight and Dimensions

Weight	13500 g