JVC GC-PX100 User Manual

Menu Settings
Setting Details
DIRECT MONITORING Configures various settings related to DIRECT MONITORING.
0
PASSWORD
Sets the password to access the camera.
“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
(A p. 106)
0
ENFORCED GROUP OWNER (Default: “ON”)
Set whether or not to get the owner group permissions.
・OFF: Set this if connection to devices that support Wi-Fi Direct fails. (When set to OFF, connection to
devices that do not support Wi-Fi Direct will be disabled.)
・ON: It is recommended to set this usually.
“Setting the Enforced Group Owner (DIRECT MONITORING)” (A p. 107)
0
HTTP PORT (Default: “80”)
Changes the port number to access to the camera.
“Changing the HTTP Port (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
(A p. 107)
0
SCORE RECORDING (Default: “OFF”)
Sets whether to record score displays in the video.
This setting is available when Wireless sync. smartphone application is used.
The recorded score display cannot be deleted later.
“Setting the Score Display Record (DIRECT MONITORING)” (A p. 108)
INDOOR MONITORING Configures various settings related to INDOOR MONITORING.
0
PASSWORD (Default: “0000”)
Selects the password to access the camera.
“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
(A p. 106)
0
HTTP PORT (Default: “80”)
Changes the port number to access to the camera.
“Changing the HTTP Port (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
(A p. 107)
OUTDOOR MONITORING Configures various settings related to OUTDOOR MONITORING.
0
PASSWORD (Default: “0000”)
Selects the password to access the camera.
“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
(A p. 106)
0
UPnP (Default: “ON”)
Sets the UPnP of the camera.
・OFF: Disables UPnP.
・ON: Enables UPnP.
“Setting the UPnP of this Camera (OUTDOOR MONITORING)” (A p. 108)
0
DDNS SETTING
Configures various settings related to DDNS.
“Setting Dynamic DNS on this Camera (OUTDOOR MONITORING)” (A p. 109)
0
HTTP PORT (Default: “80”)
Changes the port number to access to the camera.
“Changing the HTTP Port (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
(A p. 107)
DETECT/MAIL Configures various settings related to notification mails.
0
DETECT/ MAIL ATTN.
Selects the recipient’s e-mail address for Detect/Mail.
“Sending Still Images via E-mail upon Detection of Face or Movement (DETECT/MAIL)” (A p. 98)
0
MAIL SETTING
Sets the e-mail addresses of the sender and recipient.
“Setting the Sender’s E-mail Address of the Camera” (A p. 110)
“Registering the Recipient’s E-mail Address of the Camera” (A p. 113)
0
DETECTION METHOD (Default: “MOTION DETECTION”)
Sets the detection method to start recording.
・MOTION DETECTION: Starts recording upon detection of subject’s movements.
・FACE DETECTION: Starts recording upon detection of human faces.
“Setting the Detection Method of this Camera (DETECT/MAIL SETTING)” (A p. 114)
0
DETECTION INTERVAL (Default: “10 minutes”)
Sets the time period to enable detection again after the previous one.
“Setting the Detection Interval of this Camera (DETECT/MAIL SETTING)” (A p. 114)
0
SELF RECORDING (Default: “ON”)
Sets whether to record videos on this camera during detection.
Using Wi-Fi
104

JVC GC-PX100 Specifications

General

Brand	JVC
Model	GC-PX100
Category	Camcorder
Language	English