Setting Details
b OFF
Deactivates image stabilizer.
a EIS /OIS
Reduces camera shake under normal
shooting conditions.
r AIS
(A video mode only)
Reduces camera shake more effectively
when shooting bright scenes on the wide
angle end.
Only on the wide angle end (approx. 5x).
sENHANCED AIS
(A video mode only)
The area of correction is greater than that in
“AIS”. Camera shake can be reduced more
effectively even when recording is performed
by zooming from wide angle to telephoto, or
moving together with the subject.
Memo :
0
It is recommended to set the image stabilizer to “OFF” when shooting a
subject of little movement with the unit on a tripod.
0
Complete stabilization may not be possible if camera shake is excessive.
0
When “AIS” is set, the angle of view becomes narrower. In “ENHANCED
AIS”, the angle of view becomes even narrower than “AIS”.
0
Image stabilization only starts when the SNAPSHOT button is pressed
halfway during still image recording.
Marking the Video While Recording
You can mark a specific scene while recording video. When a mark is made,
the marked position is recorded to make it easy to find the position and start
a digest playback.
Marking the Video While Recording (Normal)
1
Tap “MARK”.
.
2
Tap “YES” to enter into the mark mode.
.
3
Start recording a video.
.
0
Press the START/STOP button again to stop recording.
4
Tap z, y or 0 at the scene you want to mark.
.
5
End recording a video by pressing the START/STOP button, and end
the mark mode by tapping J.
.
Recording
42
To Next Page
Loading...
Need help?
General
