D
Settings on the [Select Setup Type] Screen
.
E
Settings on the [IP Address Configuration]
Screen
When “DHCP” is selected, all items will be
grayed out.
.
F
Settings when using cellular adapter
G
Settings on the [Select FTP Proxy] Screen
H
[OK]
/[Cancel] Button
After changing of settings is complete, tap
(click) the [OK] button.
On the confirmation screen, tap (click)
[Execute] to change the settings on the camera
recorder and restart the network.
Changing Metadata Server Settings
You can make direct changes to the FTP server for
importing the metadata set in [Main Menu
] B
[System] B [Network]/[Settings] B [Metadata
Server], as well as the path of the file to import.
(A P125 [ Metadata Server ] )
Changing Clip Server Settings
You can make direct changes to the server and
directory settings that are specified in [Main
Menu] B [System] B [Network]/[Settings]
B [Clip
Server] for uploading recorded clips in the SD card
to the FTP server.
(A P126 [ Clip Server ] )
Changing Streaming Settings
You can make direct changes to settings that are
specified in [Main Menu]
B [System] B [Network]/
[Settings] B [Live Streaming Set], such as
information on the destination of distribution.
(A P122 [ Live Streaming Set ] )
Managing the Network
Connection Settings File
a
This camera recorder allows you to save the
network connection
settings on the Wizard screen
to the camera recorder unit.
Loading a saved connecting settings file enables
you to reproduce the appropriate network
connection state speedily.
Memo :
0
To save or load the connection settings, go to
[Main Menu]
B [System] B [Network]/[Settings]
B [Connection Setup].
0
The following operations can be performed on
the [Connection Setup] menu.
0
[Saving the Connection Settings File]
(A P
173)
0
[Reading the Connection Settings File]
(A P 174)
0
[Deleting Connection Settings] (A P 174)
Number of Storable Setup Files
Camera recorder : [CAM1] to [CAM4]
172
Connecting to the Network
a
To Next Page
Loading...
Need help?
General
