Operation Lock Feature
You can use this feature to prevent erroneous
camera operation.
.
AE LEVEL
MENU/THUMB
CANCEL
MENU/THUMB
CANCEL
1
While in the Camera mode (when the
display screen appears), press and hold
the [CANCEL]
button for 5 seconds or
longer.
0
The operation lock turns on, and an
operation lock icon (
r) appears on the
display screen.
.
P 13000K 1/100
F1. 6
0
dB
AE+6
ND 1 /64
00:00: 00.00
40 30 20 10
0
0
Press the [
CANCEL] button again for 5
seconds or longer to turn off the operation
lock.
Memo :
0
The operation lock feature is only valid in the
Camera mode.
(A P18 [Operation Modes] )
0
The power turns off and the operation lock is
disengaged.
0
The [CANCEL] button on the LCD monitor
section cannot be used to turn on/off (“On/Off”)
the operation lock feature.
0
The following remote operations are possible
even when the operation lock feature is turned
on (“On”).
0
Remote operation from the wired remote
control connected
to the [REMOTE] terminal.
0
Remote operation of the camera through
access via a browser on devices such as a
smartphone, tablet terminal, or PC.
Operation lock does not apply to the following
buttons and switches.
0
[POWER ON/OFF(CHG)]
switch
0
[ND FILTER] switch
0
TC [IN/OUT]
selection switch
0
All switches inside the LCD monitor door
(however, the operation of the [CH1/CH2]
adjustment knob will be locked.)
0
Focus ring
0
Zoom lever
at the grip/Zoom lever at the handle/
Zoom ring at the lens section
0
[ZOOM SERVO/MANUAL] switch
0
[FIX/VAR/OFF] zoom speed switch
0
Iris ring
0
[REC] button
(at the top of the handle, on the grip
and at the bottom of the lens)
Memo :
0
The operation lock will also not apply to the
[REC]
button at the bottom of the lens if [Camera
Function] B [User Switch Set] B [Front REC] is
set to “Rec”.
44
Preparations
To Next Page
Loading...
Need help?
General
