EasyManuals Logo
Home>JVC>Camcorder>GY-HM620E

JVC GY-HM620E User Manual

JVC GY-HM620E
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
Setting Time Code
Generator
Presetting the Time Code
Time code and user’s bit data generated from the
internal time code generator are recorded.
This section describes how to set
[TC/UB]
B [TC
Preset].
(A P107 [ TC Preset ] )
Memo :
0
When [Main Menu]
B [System] B [Record Set]
B [Record Format] B [Frame & Bit Rate] is set
to “50p”, “50i”, “25p”, or “24p”, “Drop” cannot be
selected.
(A P
118 [WFrame & Bit Rate
a, Frame & Bit
Rate b] )
0
You can
configure the setting without accessing
the [TC/UB] menu screen.
(A P68 [Setting Time Code without Opening
the Menu] )
Required Settings Before Preset
1
Set [TC/UB] B [
TC Generator
] to “Rec
Run” or “Free Run”.
(A P
107 [ TC Generator ] )
0
[Rec Run]:
Preset data in the time code generator
operates in run mode during recording
mode. Set this when recording continuous
time code in connecting frames.
0
[Free Run]:
Time code starts to operate in run mode from
the preset time in the time code generator.
2
Select the framing mode for the time code
generator
(only
when the frame rate setting
is “60” or “30”).
To configure the setting, go to [TC/UB] B [Drop
Frame].
(
A P107 [ Drop Frame ] )
0
[Drop]:
Sets
the
run mode of the time code generator
to drop frame mode. Use this setting when
placing emphasis on the recording time.
0
[Non Drop]:
Sets
the run mode of the time code generator
to non-drop frame mode. Use this setting
when placing emphasis on the number of
frames.
Memo :
Drop frame/non-drop frame mode
0
When the frame rate setting in [Main Menu]
B
[System] B [Record Set] B [Record Format] B
[Frame & Bit Rate] is “60p”, “60i”, or “30p”, the
actual number of frames per second is
approximately 59.94 (29.97). However, the time
code processing standard is “60p”, “60i”, or
“30p” frames. To make up for the frame number
discrepancy, the drop frame mode (Drop) drops
the 00 frame and 01 frame every minute except
for minutes that are multiples of 10. However, in
the case of “60p”, the 00, 01, 02 and 03 frame
are dropped.
0
The
non-drop
frame mode (Non Drop) does not
drop frames and ignores the discrepancy with
the actual time.
Setting Time Code
.
OIS / 2 LOLUX / 3
AE LEVEL
MENU/THUMB
CANCEL
MENU/THUMB
CANCEL
67
Shooting

Table of Contents

Other manuals for JVC GY-HM620E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC GY-HM620E and is the answer not in the manual?

JVC GY-HM620E Specifications

General IconGeneral
BrandJVC
ModelGY-HM620E
CategoryCamcorder
LanguageEnglish

Related product manuals