JVC KD-BT11 User Manual

ENGLISH
20
Listening to the other external components
You can connect an external component to:
• CD changer jack on the rear of this unit using the following adapters (separately purchased):
– Line Input Adapter, KS-U57
– AUX Input Adapter, KS-U58
Preparation: Make sure “EXT INPUT” is selected for the external input setting, see page 26.
• AUX (auxiliary) input jack on the control panel.
1
Select “EXT INPUT” or “AUX IN.”
2
—
Turn on the connected component and start playing the source.
3
Adjust the volume.
4
—
Adjust the sound as you want (see pages 22 – 24).
Connecting an external component to the AUX input jack
3.5 mm stereo mini plug
(not supplied)
Portable audio player, etc.
EN16-21_KD-BT11_003A_3.indd 20EN16-21_KD-BT11_003A_3.indd 20 11/30/07 3:12:06 PM11/30/07 3:12:06 PM

JVC KD-BT11 Specifications

General

MP3 playback	Yes
DVD Audio playback	No
FM band range	87.5 - 108 MHz
LW band range	144 - 279 kHz
Output power	50 W
Frequency range	16 - 20000 Hz
Audio output channels	4.0 channels
Signal-to-Noise Ratio (SNR)	98 dB
File type	MP3/WMA

Weight and Dimensions

Dimensions (WxDxH)	182 x 52 x 159.5 mm