ENGLISH
23SETTINGS
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5 Finish the procedure.
You can change PSM (Preferred Setting Mode) items
listed in the table below and on pages 24 and 25.
1 Enter the PSM settings.
2 Select a PSM item.
General settings — PSM
Indications Item
( : Initial)
Setting, [reference page]
DEMO
Display
demonstration
• DEMO ON
• DEMO OFF
: The display demonstration will be activated automatically if no
operation is done for about 20 seconds, [4].
: Cancels.
CLOCK DISP *
1
Clock display
• CLOCK ON
• CLOCK OFF
: The clock time is always shown on the display when the power is
turned off.
: Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [4].
CLOCK HOUR
Hour adjustment
1 – 12 [Initial: 1 (1:00)], [4].
CLOCK MIN
Minute adjustment
00 – 59 [Initial: 00 (1:00)], [4].
*
1
If the power supply is not interrupted by turning off the ignition key of your car, it is recommended that you select
“CLOCK OFF” to save the car’s battery.
Continued on the next page
EN22-29_KD-BT11[J]2.indd 23EN22-29_KD-BT11[J]2.indd 23 10/31/07 12:13:36 PM10/31/07 12:13:36 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
