JVC KD-BT11 User Manual

ENGLISH
21
SETTINGS
3 Select a tone.
4 Adjust the sound elements of the selected
tone.
1 Adjust the frequency.
2 Adjust the level.
Selecting a preset sound mode
You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer).
Preset value setting for each sound mode
Sound
mode
Preset value
BASS (bass) MID (mid-range) TRE (treble) LOUD
(loudness)
Freq. Level Q Freq. Level Q Freq. Level Q
USER 60 Hz 00 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz 00 Fix
OFF
ROCK 100 Hz +03 Q1.0 1.0 kHz 00 Q1.25 10.0 kHz +02 Fix
CLASSIC 80 Hz +01 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz +03 Fix
POP 100 Hz +02 Q1.25 1.0 kHz +01 Q1.25 10.0 kHz +02 Fix
HIP HOP 60 Hz +04 Q1.0 1.0 kHz –02 Q1.0 10.0 kHz +01 Fix
JAZZ 80 Hz +03 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz +03 Fix
Freq.: Frequency Q: Quality slope
Storing your own sound mode
You can adjust the sound modes and store your own
adjustments in memory.
• The adjustment you make will be stored for the
currently selected sound mode (iEQ) including
“USER.”
1 Select a sound mode.
2 Enter the adjustment mode.
This mode will be canceled if no operations are
done for about 5 seconds.
Continued on the next page
EN16-21_KD-BT11[J]2.indd 21EN16-21_KD-BT11[J]2.indd 21 10/31/07 12:13:24 PM10/31/07 12:13:24 PM

JVC KD-BT11 Specifications

General

MP3 playback	Yes
DVD Audio playback	No
FM band range	87.5 - 108 MHz
LW band range	144 - 279 kHz
Output power	50 W
Frequency range	16 - 20000 Hz
Audio output channels	4.0 channels
Signal-to-Noise Ratio (SNR)	98 dB
File type	MP3/WMA

Weight and Dimensions

Dimensions (WxDxH)	182 x 52 x 159.5 mm