1-16 (No.YA702<Rev.005>)
3.3 DISASSEMBLY PROCEDURE (LCD PANEL UNIT [QLD0566-001])
3.3.1 REMOVING THE CONTROL PWB (Fig.3-2)
• Remove the REAR COVER.
• Remove the STAND.
• Remove the MAIN BASE.
(1) Remove the 4 screws [A].
(2) Remove the CONTROL PWB COVER.
(3) Remove the CONTROL PWB.
3.3.2 REMOVING THE INVERTER PWB (Fig.3-2)
• Remove the REAR COVER.
(1) Remove the 6 screws [B].
(2) Remove the INVERTER PWB COVER.
(3) Remove the INVERTER PWB.
Fig.3-2
A
B
LCD CONTROL PWB
INVERTER PWB
LCD PANEL UNIT
FRONT