Technical Data
Page Operating Instructions for Powador .-. TL_EN
ENEN
. Mechanical data
30.0-72.0 TL3
Display Graphical LCD, 3 LEDs
Controls 4-way button, 2 buttons
Interfaces Ethernet, USB, RS485, S0, Digital output "Inverter o"
Fault signal relay Potential-free NO contact, max. 30V/ 1 A
AC connection terminals
Screw terminals inside the unit
min. cross section: 16 mm² rigid/exible
max. cross-section: 50mm² rigid/exible
AC cable connection Cable connection via M50 cable tting
DC connection terminals (M variant)
Screw terminals on top hat rail inside the unit
min. cross section: 6 mm² rigid/exible
max. cross-section: 35 mm² rigid/exible
DC connection terminals (XL variant)
Screw terminals on top hat rail inside the unit
min. cross section: 2.5 mm² rigid/exible
max. cross-section: 10mm² rigid/exible
Connections for DC cable connection
Cable connection 30.0 - 40.0 TL3 via 6 M32 cable ttings
Cable connection 60.0 - 72.0 TL3 via 6 M40 cable ttings
Connection for Ethernet cable connec-
tion
Cable connection via M25 cable tting
Ambient temperature range [°C] -20 ... 60
Maximum installation elevation (m
above mean sea level)
2,000
Temperature monitoring Yes
Cooling (free convection (K)/fan (L)) L (max. 600 m³ /h)
Protection rating according to EN 60529 IP54
Degree of contamination PD2
DC isolator switch Built-in
Housing Steel plating
H x W x D [mm] 1360 x 840 x 355
Total weight [kg] 151 (30.0-48.0 TL3), 173 (60.0-72.0 TL3)
Table 3: Mechanical data
To Next Page
Loading...
Need help?
General