Kaco Powador User Manual

Configuration and Operation
Page  Operating Instructions for Powador .-. TL_EN
ENEN
 Conguration and Operation
. Controls
The inverter has a backlit LCD as well as three status LEDs. The inverter is operated using six buttons.
1
2
3
4
5
6
7
Figure : Control panel
Key
1 "Operating" LED 5 4-way button
2 "Feed-in" LED 6 “OK” button
3 "Fault" LED 7 “ESC” key
4LCD
.. LED indicators
The three LEDs on the front of the inverter show the dierent operating states.
The LEDs can display the following states:
LED illuminated LED ashing LED not illuminated
The LED indicators show the following operating status:
Operating status LEDs Display Description
Start The green "Operating" LED is illuminated
if an AC voltage is present,
(independently of the DC voltage).
Feed-in start
Power fed into the grid
or measured values
The green "Operating" LED is lit.
The green "Feed-in" LED is illuminated
after the country-specic waiting period*.
The inverter is ready to feed in, i.e. is on
the grid.
You can hear the grid relay switch on.
Feed-in operation
Power fed into the grid
or measured values
The green "Operating" LED is lit.
The green “Feed-in” LED is illuminated.
The “Feed-in” icon appears on the desk-
top.
The inverter feeds into the grid.
* The waiting period is used for network monitoring and ensures that all network parameters are in the permissi-
ble range.
For country-specic waiting periods, see our website at http://www.kaco-newenergy.de/.

Kaco Powador Specifications

General

Brand	Kaco
Model	Powador
Category	Inverter
Language	English