To Next Page

To Previous Page

GB - 24

COMBICONTROL

sy.05 congurationdata Address 0005h

Output of internal device data.

sy.06 device address Address 0006h

This parameter determines the Fieldbus address.

sy.07 baud rate 66019II Address 0007h

The baud rate for the KEB DIN 66019II protocol is adjusted with this parameter.

sy.10 C5 Address 000Ah

Display of the unit type.

The following parameters serve for the operation of the inverter scope part of COMBIVIS.

sy.32 scope timer Address 0020h

sy.33 scopedata1den. Address 0021h

sy.34 scope data 1 set Address 0022h

sy.35 scopedata2den. Address 0023h

sy.36 scope data 2 set Address 0024h

sy.37 scopedata3den. Address 0025h

sy.38 scope data 3 set Address 0026h

sy.39 scopedata4den. Address 0027h

sy.40 scope data 4 set Address

0028h

3.3.7 Debugging

Parameters 06xxh are only used for the diagnosis during the production process.

Questions and Answers:

Need help?

Do you have a question about the KEB COMBICONTROL C5 and is the answer not in the manual?

KEB COMBICONTROL C5 Specifications

General