KEEBOX Wireless 11n Router
PPPoE
Choose PPPoE (Point to Point Protocol over Ethernet) if the ISP uses a PPPoE connection. The ISP will
provide you with a username and password. This option is typically used for DSL services. Make sure to
remove your PPPoE software from your computer. The software is no longer needed and will not work
through a router.
Fields Description
Login Enter the PPPoE login name.
Password Enter the PPPoE password.
Service Name Enter the ISP service name. This is optional.
MTU Maximum Transmission Unit is for optimal performance with some ISPs.
Type Use the drop-down list to select Keep Connection, Automatic Connection or Manual
Connection.
Idle Timeout This is an age-out value, in minutes, before the Router times out.
Click Apply to save the changes.
PPTP
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will
provide you with a username and password. This option is typically used for DSL services.
23