Keithley S530 Diagnostic Manual

Appendix B: Kelvin (4W) S530 system diagnostics S530 Diagnostic Manual
 Use pin 3 to connect the force and sense terminals of the common lo (GNDU) with row E.
 Use the current row (C, D, E, or F) on the sense card to connect the SMU under test and the test
support SMU together.
Figure 53: Rows C and D, row E to GNDU, row to C to SMU, row D to SMU
3. If the current row is E.
 Use pin 1 to connect the force and sense terminals of the SMU under test with row C.
 Use pin 2 to connect the force and sense terminals of the support SMU (except GNDU) with row
D.
 Use pin 3 to connect the force and sense terminals of the common lo (GNDU) with row F.
 Use the loop current row (E) in the sense test to short connect the current SMU and the support
SMU.
Figure 54: Rows E and F, row G to GNDU, row to C to SMU, row D to SMU
SMU test
The SMU test uses the first test pin and the first SMU of the Series 2600A instruments group that is
under test (see next Figure).
3-14 S530-906-01 Rev. A / March 2011

Keithley S530 Specifications

General

Brand	Keithley
Model	S530
Category	Test Equipment
Language	English