3: LPTLib command reference S530/S540 KTE Linear Parametric Test Library (LPTLib) User's Manual
3-2 S530-900-01 Rev. E / September 2017
The following table contains a list of valid suffixes, the parameter (function) each represents, and
the units used throughout the LPTLib for that parameter.
Suffix Parameter Unit
c Capacitance Farads
i Current Amperes
rh Relative humidity Percent
v Voltage Volts
• Brackets [] are used to enclose optional arguments of a command.
• Period strings (...) indicate additional arguments or commands that can be added.
• Periods ( . ) indicate data not shown in an example because it is not necessary to help explai
n
t
he command.
Categorized command lists
The command descriptions are presented in alphabetical order in the LPTLib commands (on page
3-7) section. The tables that follow contain all of the commands grouped by function, with a brief
description of the purpose of the command and a hyperlink to the full command description.
To Next Page
Loading...
Need help?
General
