Kenwood 1090VR User Manual

fOr, 1
gace
OW Of
rtAIC Dy
OV
Q
2
id f
OHOWOE
OOOO) aid
|
Recording video
eos
@ Select the source you want to record. ;
e When recording to a VCR connected to the VIDEO? jacks, select a
INPUT SELECTOR : source other than VIDEOQ1.
e When recording to a VCR connected to the VIDEO2 jacks, select a
source other than VIDEO2.
© To record a digital source, connected to the VIDEO 2, 3, or 4 Jacks, turn
the INPUT SELECTOR to select the appropriate copmponent, then
press the STEREO key.
When making a digital recording, operations other than volume adjust-
@ Set the video deck to record. ; ment may cause the sound to clip during recording.
¢The AV AUX jacks on the front pane! provide a convenient way to
@ Start playback, then start recording. connect a video camera (playback only).
When recording a Dolby Digital (AC-3) source, press the STEREO key
to light the "2 CH DOWNMIX" indicator.
* guuigcesvug)

Kenwood 1090VR Specifications

General

Brand	Kenwood
Model	1090VR
Category	Stereo Receiver
Language	English