Kenwood 1090VR User Manual

DOLBY AC-3 can be used when playing DVD or LD software bearing the CX) [ocusr sursicunn ]
DIEGITAL
1O90VR (En/K)
mark and DOLBY DIGITAL (AC-3) for-
mat
digital
broadcasts
(etc.).
DOLBY
PRO
LOGIC
and
DOLBY
3
STEREO
can
nbe
used
when
playing
video,
DVD,
or
LD
software
bearing
the
[{][Dasy
sunnoun]
mark.
DSP
modes
can
be
used
with
any
source.
Be sure to complete "Surround set up" before using any of these surround modes.
Preparations
¢ Turn ON related components.
* Complete “Surround set up". —(48:
eSet the INPUT SELECTOR to the §£
component you wish to play back —
with surround sound. ’
———
2 Select a surround mode.
SOUND
i oo mo oe
[acs] (enolate) (semen) (ose) SGI
~
Select
the
icon
for
the
mode
you
desire.
The
selected
icon
turns
blue.
The
surround
mode
settings
are
stored
separately
for
each
input.
Surround
modes
can
also
be
selected
by
using
the
LISTEN
MODE
key
on
the
remote
control.
-(z
(3) = foso) Cet) oo)
Midnight mode Fes
Source direct ~
Displays set up menu = BEA
OSD 37,
Raaio Text ~ 32
DOLBY DIGITAL (AC-3)
When a Dolby Digital (AC-3) format signal is
input, press to select the Dolby Digital (AC-3)
mode. To select this icon, the input selector
must be set to VIDEO 2, 3, or 4. No sound will
be heard if selected when normal stereo
sources are input.
DOLBY (PRO LOGIC)
Selects the DOLBY PRO LOGIC mode.
To select this icon, the surround speakers
must be selected. =~ 78
DOLBY (3 STEREO)
Selects the DOLBY 3 STEREO mode.
To select this icon, the center speaker must
be selected. — 18.
a A
DSP
Turns on the current DSP mode and switches 4
to the DSP screen where you can adjust
various aspects of each DSP mode.
STEREO
Cancels surround playback.
If selected when a Doiby Digital AC-3 signal 4
is Input, the 2CH DOWNMIX indicator on the
front panel lights up and the signals are 4
downmixed to 2 channel stereo.
Source Direct (S.DIR)
Lets you pass the source material direct to }
the amplifier, bypassing any audio process-
ing. ‘
A
Press
the
SOUND
key
on
the
remote
to
turn
off
the
on-screen
display,
then
press
either
VIDEO,
AUDIO,
or
TV
key
on
the remote to
cancel
the
OSD
remote control mode.
Start playing the video software.
G Adjust the volume.
3)
compatible
source
component.
Connect
the
Dolby
Digital
(AC-3)
compatible
source
component's
AC-3
format
digital
audio
signal
to
one
of
eg
To
enjoy
Dolby
Digita!
(AC-3)
surround
(as
weil
as
all
the
other
surround
modes)
from
a
single
component,
be
sure
to
use
a
Dolby
Digital
(AC-
Note
the
DIGITAL
INPUT
jacks
on
the
back
of
the
receiver.
Connect
the
normal
audio
signal
correctly
to
the
respective
component's
AUDIO
jacks.
~cie. Gk
arnntinunad an nave nana

Kenwood 1090VR Specifications

General

Brand	Kenwood
Model	1090VR
Category	Stereo Receiver
Language	English