iPod/iPhone
25English
iPod/iPhone
Preparation
Ñ Connectable iPod/iPhone
The following models can be connected to
this unit.
Made for
• iPhone 6s Plus
• iPhone 6s
• iPhone 6 Plus
• iPhone 6
• iPhone 5s
• iPhone 5c
• iPhone 5
• iPod touch (6th generation)
• iPod touch (5th generation)
NOTE
• Latest compatible list of iPod/iPhone. For details,
see www.kenwood.com/cs/ce/ipod/.
• By connecting your iPod/iPhone to this unit with
an optional accessory iPod connection cable
KCA-iP103, you can supply power to your iPod/
iPhone as well as charge it while playing music.
However, the power of this unit must be on.
• If you start playback after connecting the iPod,
the music that has been played by the iPod is
played first.
Ñ Connect iPod/iPhone
Wired connection
Preparation
• Connect an iPod/iPhone with the KCA-iP103
(optional accessory) while CarPlay is not
connected.
• With a CarPlay-capable iPhone, turn off CarPlay
by operating the iPhone at functional setup
before connecting iPhone. For details of the
setup method, contact the manufacturer of the
terminal.
• DDX9717BTS: Plug the iPod/iPhone into the
gray USB terminal with the KCA-iP103 (optional
accessory).
• Only one iPod/iPhone can be connected.
1
Connect the iPod/iPhone using KCA-
iP103. (P.82)
2
Press the [HOME] button.
3
Touch [ ].
4
Touch [iPod]. (P.11)
● To disconnect the iPod/iPhone connected
with the cable:
1
Detach the iPod/iPhone.
Bluetooth connection
Preparation
• To connect an iPhone via Bluetooth, register it as
the Bluetooth device and do the profile setting of
the connection beforehand. See Register from
the Bluetooth unit (P.44) and Connect the
Bluetooth unit (P.46).
• Connect an iPhone on Bluetooth while CarPlay
and an iPod/iPhone are not connected on USB.
Pair the iPhone through Bluetooth.
● Select the method of making connections
for outputting sound from the iPod
source. (DDX9717BTS)
1
Press the [MENU] button.
Popup menu appears.
2
Touch [SETUP].
SETUP screen appears.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
