Name: Kenwood DMX7017DABS
Brand: Kenwood
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Connection/Installation

Ñ Removing the trim plate

1) Engage the catch pins on the extraction key

(accessory 5) and remove the two locks on

the lower level.

Lower the trim plate (accessory 6) and pull it

forward as shown in the figure.

Lock

Catch

NOTE

• The trim plate can be removed from the top side

in the same manner.

2) When the lower level is removed, remove the

upper two locations.

Ñ Removing the unit

1) Remove the trim plate by referring to step 1 in

"Removing the trim plate".

2) Insert the two extraction key (accessory 5)

deeply into the slots on each side, as shown.

3) Lower the extraction key toward the bottom,

and pull out the unit halfway while pressing

towards the inside.

NOTE

• Be careful to avoid injury from the catch pins on

the extraction key.

4) Pull the unit all the way out with your hands,

being careful not to drop it.

Questions and Answers:

Need help?

Do you have a question about the Kenwood DMX7017DABS and is the answer not in the manual?

Kenwood DMX7017DABS Specifications

General